Welded reinforcement mesh Welded reinforcement mesh especially in material of deformed steel bar is regularly used for concrete slab construction, such as roadways, in curved structures such as in domes and as bonding fabric for gunite. The cost, time and labor savings of welded wire mesh offers an advantage over traditional tied rebar.
Details Product Description
heavy type welded wire mesh panels including steel bar welded wire mesh.
Wire diameter for welded steel bar panels ranges from 5mm to 16mm.
Welded bar panels opening: 75mm to 300mm.
Panel length: 100cm to 1400cm.
Panel width: 100cm to 300cm.
Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.
| Ref No: |
Nominal Pitch |
Wire Size |
Cross sectional area per meter width |
Nominal |
| weight |
| Main Bar |
Cross Bar |
Main |
Cross |
main |
cross |
per m2 |
| DWM001 |
200 |
200 |
10 |
10 |
393 |
393 |
6.16 |
| DWM002 |
200 |
200 |
8 |
8 |
252 |
252 |
3.95 |
| DWM003 |
200 |
200 |
7 |
7 |
193 |
193 |
3.02 |
| DWM004 |
200 |
200 |
6 |
6 |
142 |
142 |
2.22 |
| DWM005 |
200 |
200 |
5 |
5 |
98 |
98 |
1.54 |
| DWM006 |
100 |
200 |
12 |
8 |
1131 |
252 |
10.9 |
| DWM007 |
100 |
200 |
10 |
8 |
785 |
252 |
8.14 |
| DWM008 |
100 |
200 |
8 |
8 |
503 |
252 |
5.93 |
| DWM009 |
100 |
200 |
7 |
7 |
385 |
193 |
4.53 |
| DWM010 |
100 |
200 |
6 |
7 |
283 |
193 |
3.73 |
| DWM011 |
100 |
200 |
5 |
7 |
196 |
193 |
3.05 |
| DWM012 |
100 |
400 |
10 |
6 |
785 |
70.8 |
6.72 |
| DWM013 |
100 |
400 |
9 |
6 |
636 |
70.8 |
5.55 |
| DWM014 |
100 |
400 |
8 |
5 |
503 |
49 |
4.34 |
| DWM015 |
100 |
400 |
7 |
5 |
385 |
49 |
3.41 |
| DWM016 |
100 |
400 |
6 |
5 |
283 |
49 |
2.61 |
welded reinforcement mesh can be classified into four major types:
1. Rectangular Welded Mesh with wires crossed in a form of a rectangle, and longitudinal wire as the supporting one;
2. Square opening welded steel mesh with wires crossed in a form of a square, and both longitudinal and transversal wires as supporting ones;
3. welded reinforcement mesh for vertical wall building;
4. Special type.
 |
 |
Welded reinforcement mesh can all be used in concrete reinforcing. Concrete is one of the more common materials used in the construction of commercial buildings. Its properties make concrete an excellent choice for steel structures, cladding systems and floor slabs on grade. Although concrete is an excellent building material and is extremely strong in compression, it has one limitation - concrete is weak in tension. By combining concrete with material that is strong in tension, we can create a composite that greatly reinforced. This type of steel reinforcement used in concrete is welded reinforcement mesh (WRM) or welded wire fabric (WWF).
Welded reinforcement mesh consists of pieces of wire or rebar welded together to form a grid pattern. The size of the grid pattern is typically 4-inch-by-4-inch up to 8-inch-by-8-inch. This type of welded reinforcement mesh is used to minimize shrinkage cracking in the surface of the concrete.
